Fix Your Stuff Community Store

Levoit LV-H132 Cord Replacement

Introduction

Is your Levoit LV-H132 not turning on because the cable is damaged? Does the cord create sparks when plugged in or does it smell burnt? If the power cord doesn’t allow power transmission, then the air purifier will certainly not power up. To fix that, we have to replace it. So, use this guide to fix your damaged cord.

What you need

  1. Levoit LV-H132 Cord Replacement, Cord: step 1, image 1 of 2 Levoit LV-H132 Cord Replacement, Cord: step 1, image 2 of 2

    • Pry off the plastic top using a metal spudger.

    Edit

  2. Levoit LV-H132 Cord Replacement: step 2, image 1 of 2 Levoit LV-H132 Cord Replacement: step 2, image 2 of 2

    • Remove the three 1.2 mm screws with a Phillips #1 screwdriver.

    Edit

  4. Levoit LV-H132 Cord Replacement: step 3, image 1 of 2 Levoit LV-H132 Cord Replacement: step 3, image 2 of 2

    • Disconnect the top half from the bottom.

    Edit

  5. Levoit LV-H132 Cord Replacement: step 4, image 1 of 3 Levoit LV-H132 Cord Replacement: step 4, image 2 of 3 Levoit LV-H132 Cord Replacement: step 4, image 3 of 3

    • Disconnect the circuit board cable.

    Edit

  6. Levoit LV-H132 Cord Replacement: step 5, image 1 of 2 Levoit LV-H132 Cord Replacement: step 5, image 2 of 2

    • Use a heat gun to heat up the heat-shrink tubing wraps.

    • Disconnect the damaged cable from the wires that are connected to the motherboard.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 13

All Time: 190