Fix Your Stuff Community Store

Lenovo Yoga Tablet 10 Camera PCB Replacement

Introduction

Before starting this guide, you should have a way to prevent the loss of small screws.

What you need

  1. Lenovo Yoga Tablet 10 Camera PCB Replacement, Back Cover: step 1, image 1 of 1

    • Remove the two Phillips #000 screws.

    • These screws are located behind the stand for the device.

    • Our device did not include these screws.

    Edit

  2. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 2, image 1 of 1

    • Use a plastic iFixit opening tool to pry the edges of the back case loose by placing it in between the edge of the cover and the screen.

    • Do not immediately attempt to remove the back of the case without attempting Step three, or you risk snapping the back cover.

    Edit

  3. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 3, image 1 of 2 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 3, image 2 of 2

    • Use the spudger to reach into the center of the device and pry off the back case by giving it a light force upwards.

    Edit

  4. Lenovo Yoga Tablet 10 Camera PCB Replacement, Back Camera: step 4, image 1 of 2 Lenovo Yoga Tablet 10 Camera PCB Replacement, Back Camera: step 4, image 2 of 2

    • Remove one 5mm screw using the Phillips #00 Screwdriver.

    Edit

  6. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 5, image 1 of 3 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 5, image 2 of 3 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 5, image 3 of 3

    • Use the spudger to disconnect the camera and battery from the printed circuit board by putting the spudger in between the connections and the printed circuit board and pushing the spudger up.

    Edit

  7. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 6, image 1 of 1

    • Remove one 5mm screw with the Phillips #00 screwdriver.

    Edit

  8. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 7, image 1 of 3 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 7, image 2 of 3 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 7, image 3 of 3
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Use the nylon tip tweezers to push the camera out from between the power button and the kickstand.

    Edit

  9. Lenovo Yoga Tablet 10 Camera PCB Replacement, Camera PCB: step 8, image 1 of 1

    • Remove the four 1 mm screws with a Phillips #00 Screwdriver.

    Edit

  10. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 9, image 1 of 2 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 9, image 2 of 2

    • Use a spudger to disconnect the ribbon wire by applying a force upwards.

    Edit

  11. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 10, image 1 of 2 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 10, image 2 of 2
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Use tweezers to lift up the foil.

    • The foil may tear.

    Edit

  12. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 11, image 1 of 2 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 11, image 2 of 2

    • Use the tweezers to lift the black tape from the corner of the printed circuit board.

    Edit

  13. Lenovo Yoga Tablet 10 Camera PCB Replacement: step 12, image 1 of 3 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 12, image 2 of 3 Lenovo Yoga Tablet 10 Camera PCB Replacement: step 12, image 3 of 3

    • Flip the board 180 degrees towards you using the tweezers.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 5 other contributors

Juan Benjamin

Member since: 01/24/19

490 Reputation

4 Guides authored

Badges: 11

+8 more badges

Team

Cal Poly, Team S2-G6, White Winter 2019 Member of Cal Poly, Team S2-G6, White Winter 2019

CPSU-WHITE-W19S2G6

4 Members

7 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 7

All Time: 405