Lenovo Yoga Tab 3 8 Back Cover Replacement

Step 1 Back Cover




• Open the kickstand by pressing the release button in the center.
• Remove the identification sticker with a pair of tweezers to allow access to the two 2mm screws underneath.
Step 2

• Remove the three 2mm screws under the kickstand with a PH00 screwdriver.
• The third 2mm screw to the right may have an S sticker covering it which you can scrape off.
Step 3
• Starting along the edge opposite of the hinge, insert a plastic opening tool between the screen and the backing to begin separating the small clips holding the backing on.
• Work along the edge and then up the sides, separating the clips with the plastic opening tool.
• There is adhesive underneath the slot for the SD card so you will need to slowly apply some force to break the adhesive.
• As the back is separated from the device, be careful to not lose the power button. It may come loose and fall out.

Author

with 4 other contributors

Nicklaus Krems

Member since: 09/25/17

1,049 Reputation

8 Guides authored

Badges: 16

• 
• 
• 

+13 more badges

Team

USF Tampa, Team S16-G2, Eyestone Fall 2017 Member of USF Tampa, Team S16-G2, Eyestone Fall 2017

USFT-EYESTONE-F17S16G2

4 Members

16 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview