Introduction

This guide will walk you through the replacement of the solid state drive in your Lenovo Yoga 2 Pro. The solid state drive holds all of the data on your computer. Because of this, one should still be weary of potential dangers of disposing of the drive incorrectly. Individuals could still possibly recover the data off of the drive. Please use caution when disposing of the solid state drive.

Parts

No parts required.

Image 1/1: Using a Phillips #00 screwdriver, remove the eleven 1/4" screws from the back of the laptop.
  • Please ensure that the laptop is turned off before beginning.

  • Using a Phillips #00 screwdriver, remove the eleven 1/4" screws from the back of the laptop.

I believe these are Torx T5, not Phillips.

Kiran Rao - Reply

Image 1/1:
  • Gently lift off the back cover.

Add Comment

Image 1/1: Using a Phillips #00 screwdriver, remove the one 3/16” screw from the top left corner of the solid state drive.
  • Navigate to the top right corner of the laptop and locate the solid state drive next to the fan.

  • Using a Phillips #00 screwdriver, remove the one 3/16” screw from the top left corner of the solid state drive.

  • The solid state drive will lift up after you remove the screw.

Add Comment

Image 1/2: Image 2/2:
  • To remove the solid state drive, gently slide it away from the battery and towards the hinges.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 other people completed this guide.

Thomas Simko

Member since: 10/01/2015

1,332 Reputation

5 Guides authored

Team

Cal Poly, Team 12-14, Maness Fall 2015 Member of Cal Poly, Team 12-14, Maness Fall 2015

CPSU-MANESS-F15S12G14

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 14

Past 7 Days: 133

Past 30 Days: 506

All Time: 6,953