Step 1 LCD

• First you push the lock button on the back of the computer from lock to unlock
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2

• Then you hold it on unlocked and slide the battery pack out
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• remove all screw covers above hinges
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Unscrew the screws on the front of the LCD screen
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 5
• Remove additional two screws near bezel screws plus the single logic board screw in the center
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Gently pry the LCD cover with a flat head screwdriver, and pivot it over the signal cable near the LCD hinges. Pivot over all four corners
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 7
• Continue to remove screens in front of the LCD cover, make sure all screws in the front are removed
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 8
• Once all screws are removed, remove the LCD Display but gently peeling back line a sticker
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

<iframe id="dozuki-embed-107442" src="https://www.ifixit.com/Guide/embed/107442/full" width="800" allowfullscreen frameborder="0"></iframe> <script>window.addEventListener("message",function(a){var b=document.getElementById("dozuki-embed-107442"),c=a.data[0],d=a.data[1];switch(c){case"setHeight":b.style.height=d+"px"}},!1);</script> <iframe src="https://www.ifixit.com/Guide/embed/107442" width="800" height="584" allowfullscreen frameborder="0"></iframe>

Preview