Introduction

This is just a prerequisite guide for the webcam and screen replacement guides.

  1. Use a spudger to remove the plastic covers from the LCD screen. Use a spudger to remove the plastic covers from the LCD screen.
    • Use a spudger to remove the plastic covers from the LCD screen.

  2. Remove the two 6.0mm screws on each side using Philips #0 head screwdriver as shown in the picture.
    • Remove the two 6.0mm screws on each side using Philips #0 head screwdriver as shown in the picture.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use a spudger to separate the bezel of the LCD screen.
    • Use a spudger to separate the bezel of the LCD screen.

  5. Continue along the edges lifting up and prying off the plastic LCD bezel. Continue along the edges lifting up and prying off the plastic LCD bezel. Continue along the edges lifting up and prying off the plastic LCD bezel.
    • Continue along the edges lifting up and prying off the plastic LCD bezel.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Gabriel Cordova

Member since: 10/02/2017

601 Reputation

4 Guides authored

Team

USF Tampa, Team S1-G2, Thompson Fall 2017 Member of USF Tampa, Team S1-G2, Thompson Fall 2017

USFT-THOMPSON-F17S1G2

4 Members

6 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 75