Introduction
If an internal piece of your Lenovo ThinkPad X1 Carbon (2nd Gen) needs to be replaced, use this guide to remove the back cover to gain access to the internal parts.
Before you begin, make sure your computer is off.
What you need
-
-
Using a Phillips #0 screwdriver, remove the seven 7mm screws holding the back cover onto your computer.
-
-
Almost done!
To reassemble your device, follow these instructions in reverse order.
Conclusion
To reassemble your device, follow these instructions in reverse order.
Team
Cal Poly, Team S18-G4, White Winter 2020 Member of Cal Poly, Team S18-G4, White Winter 2020
CPSU-WHITE-W20S18G4
4 Members
7 Guides authored
