Lenovo ThinkPad P50 Bottom RAM module
Kavyansh Khaitan and
Last updated on May 7, 2025
Views: 899
View statistics:
- Past 24 Hours:
- 5
- Past 7 Days:
- 21
- Past 30 Days:
- 82
- All Time:
- 899
Comments: 1
1 comment on steps.
Completed: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
Mismatched Prerequisites
This guide does not have a proper prerequisite guide. Help match it to its ideal partner by finding it or writing one!
Community-Contributed Guide
An awesome member of our community made this guide. It was not created by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
Introduction
Go to step 1 ↓This guide shows you how to replace the DDR4 RAM modules in your Lenovo P50.
Video tutorial:
What you need
Parts
-
SODIMM RAM (DDR4)
Required to upgrade your RAM. Decide if you need 1 or 2 sticks!
Tools
-
Pro Tech Go Toolkit$49.954.9Optional
Not required if you have a driver set or toolkit with a Phillips #0 bit. Contains opening picks and screwdriver.
-
-
Video Overview
(YouTube Video)
-
-
-
Slide the battery latch to the left.
-
Once the battery is unlocked, remove it from the unit by sliding a pry tool or fingernail under the gap on the chassis.
Ask FixBot
-
-
-
Remove the 6 captive Phillips head screws.
-
Pull up the notch with your fingernail or pry tool
-
-
-
-
Pull the flaps and look for an empty slot
-
You can add your RAM to an empty slot or replace it with the new one.
-
-
To reassemble your device, follow these instructions in reverse order.
