Lenovo Tab 4 8 MicroSD Card Reader Replacement

Step 1 Battery




• Start at the microSD slot.
• Use the opening pick to slide underneath the back cover of the tablet.
• Slide the opening pick around the tablet until the back cover is off.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 2




• Remove the 8 screws with a Phillips #000 screwdriver [bit].
• There is a screw under the blue "s" sticker.
• Remove tape holding plate down.
• Use precision tweezers or your fingers to remove plate.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 3
• Remove yellow tape.
• Use a spudger or plastic opening tool to remove the battery's ribbon cable from the motherboard.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment
Step 4
• Gently pull on the two stretch release adhesive strips. Do not pull up, pull away from battery.
• Once the tabs are off, lift the battery up from the frame.
• Do not bend or puncture the battery.
Edit
3 comments
Add a comment
Add Comment
1024
Cancel Post comment
Step 5 MicroSD Card Reader
• There is a yellow tape holding the microSD card reader connector. Use tweezers to hold down the tape.
• Gently lift the tab on the microSD card reader's ZIF connector, and gently pull the ribbon cable free.
Edit
3 comments
Add a comment
Add Comment
1024
Cancel Post comment
Step 6
• Lift the microSD card reader with tweezers or your fingers.
Edit
Add a comment
Add a comment
Add Comment
1024
Cancel Post comment

Author

with 1 other contributor

Ivan Chavez

Member since: 02/06/19

776 Reputation

6 Guides authored

Badges: 8

• 
• 
• 

+5 more badges

Team

Purdue University Northwest, Team S2-G4, Hingst Spring 2019 Member of Purdue University Northwest, Team S2-G4, Hingst Spring 2019

PNW-HINGST-S19S2G4

5 Members

6 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview