Introduction

In order to remove and replace the power button on your tablet, a soldering iron will be needed.

Use a plastic opening tool to pry open the back cover of the tablet. Use a plastic opening tool to pry open the back cover of the tablet.
  • Use a plastic opening tool to pry open the back cover of the tablet.

Add Comment

The power button strip is only held in place by a small piece of double-sided tape.
  • The power button strip is only held in place by a small piece of double-sided tape.

    • Gently use the precision tweezers to separate the power button strip from the interior frame of the tablet.

Add Comment

Be careful with the soldering iron to avoid injury.
  • Be careful with the soldering iron to avoid injury.

  • Remove the power button from the motherboard.

    • Use the soldering iron to heat up the connections. Gently pull away from the motherboard after connections are detached.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Tyler Hagenlocher

Member since: 02/08/2016

302 Reputation

2 Guides authored

Team

USF Tampa, Team 12-6, Eyestone Spring 2016 Member of USF Tampa, Team 12-6, Eyestone Spring 2016

USFT-EYESTONE-S16S12G6

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 28

Past 30 Days: 118

All Time: 1,265