Introduction

Learn how to remove the speakers from the Miix 2 in a few, quick steps.

Remove the back cover of the tablet by inserting nylon or metal spudger in the small hole between the screen and rear cover near the volume button. slide along the edge of the tablet to release the internal clasps. You should have to apply a good amount of force, but pry carefully in order to avoid damaging the clasps or the internals.
  • Remove the back cover of the tablet by inserting nylon or metal spudger in the small hole between the screen and rear cover near the volume button. slide along the edge of the tablet to release the internal clasps.

  • You should have to apply a good amount of force, but pry carefully in order to avoid damaging the clasps or the internals.

Add Comment

Unscrew the six 3mm J0 screws surrounding the battery dock. Unscrew the six 3mm J0 screws surrounding the battery dock.
  • Unscrew the six 3mm J0 screws surrounding the battery dock.

Add Comment

Using a plastic spudger, slowly push each side of the battery connector (back and forward a couple of times) out of its socket on the motherboard. Using a plastic spudger, slowly push each side of the battery connector (back and forward a couple of times) out of its socket on the motherboard.
  • Using a plastic spudger, slowly push each side of the battery connector (back and forward a couple of times) out of its socket on the motherboard.

Add Comment

Remove the battery by prying up with your fingers or a plastic opening tool. Remove the battery by prying up with your fingers or a plastic opening tool.
  • Remove the battery by prying up with your fingers or a plastic opening tool.

Add Comment

Remove the red and black connector cable linking the speakers to the motherboard with tweezers by pulling the connector to the left with a light degree of force. To properly remove the speakers from the casing, push gently left until it shifts, then pull directly up.
  • Remove the red and black connector cable linking the speakers to the motherboard with tweezers by pulling the connector to the left with a light degree of force.

  • To properly remove the speakers from the casing, push gently left until it shifts, then pull directly up.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Diana Chiu

Member since: 07/14/2014

602 Reputation

4 Guides authored

Team

iFixit Member of iFixit

Community

129 Members

6,427 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 11

All Time: 575