Introduction

This guide aims to teach you how to replace the USB 2.0 and 3.5 mm headphone ports of the Lenovo Ideapad 110S-11IBR.

Unscrew the eleven 4 mm Phillips screws on the bottom of the device. Unscrew the eleven 4 mm Phillips screws on the bottom of the device.
  • Unscrew the eleven 4 mm Phillips screws on the bottom of the device.

Add Comment

Loosen the back lid using a plastic opening tool. Lift the back lid off of the device.
  • Loosen the back lid using a plastic opening tool.

  • Lift the back lid off of the device.

Add Comment

Remove the battery connector using a plastic opening tool, from its socket. Remove the two pieces of tape that are holding the battery down.
  • Remove the battery connector using a plastic opening tool, from its socket.

  • Remove the two pieces of tape that are holding the battery down.

Add Comment

Mac RAM Kits
Speed up your Mac. Max out its memory.
Mac RAM Kits
Get more memory out of your Mac.
Remove the five 4 mm Phillips screws. Lift the battery up and put it to the side. Lift the battery up and put it to the side.
  • Remove the five 4 mm Phillips screws.

  • Lift the battery up and put it to the side.

Add Comment

Unscrew the three 4 mm Phillips screws. Unscrew the three 4 mm Phillips screws.
  • Unscrew the three 4 mm Phillips screws.

Add Comment

Unlatch and remove the ribbon cable. Ribbon cables can be fragile, so avoid  excessively bending it.
  • Unlatch and remove the ribbon cable.

  • Ribbon cables can be fragile, so avoid excessively bending it.

Add Comment

Remove the card from the laptop.
  • Remove the card from the laptop.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Andrew Hollingsworth

Member since: 09/20/2017

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 5

Past 30 Days: 34

All Time: 217