Introduction

Use this guide to remove the rear case, which is designed to prevent damage to interior components.

This guide will provide step-by-step instructions on how to access the internal components.

Flip the device so the rear case is facing upward. With the plastic opening tool carefully pry the plastic piece shown in the picture, until it is completely removed from the case. With the plastic opening tool carefully pry the plastic piece shown in the picture, until it is completely removed from the case.
  • Flip the device so the rear case is facing upward.

  • With the plastic opening tool carefully pry the plastic piece shown in the picture, until it is completely removed from the case.

Add Comment

Using your fingers, carefully remove the rubber boot from the right side of the rear case. With the Phillips #1 head, remove the screw placed directly under the rubber boot.
  • Using your fingers, carefully remove the rubber boot from the right side of the rear case.

  • With the Phillips #1 head, remove the screw placed directly under the rubber boot.

Add Comment

Using the plastic opening tool, push the display screen on the device forward until it separates from the rear casing.
  • Using the plastic opening tool, push the display screen on the device forward until it separates from the rear casing.

Add Comment

Using the plastic opening tool, carefully pry around the perimeter of the screen until the entire screen is completely separated from the rear casing.
  • Using the plastic opening tool, carefully pry around the perimeter of the screen until the entire screen is completely separated from the rear casing.

Add Comment

Before completely separating the screen from the rear casing you will carefully detach two wires that are connected to both sides of the device. This will allow you to completely separate the rear casing from screen. Before completely separating the screen from the rear casing you will carefully detach two wires that are connected to both sides of the device. This will allow you to completely separate the rear casing from screen. Before completely separating the screen from the rear casing you will carefully detach two wires that are connected to both sides of the device. This will allow you to completely separate the rear casing from screen.
  • Before completely separating the screen from the rear casing you will carefully detach two wires that are connected to both sides of the device. This will allow you to completely separate the rear casing from screen.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Zak Kazakos

Member since: 09/25/2017

302 Reputation

3 Guides authored

Team

USF Tampa, Team S3-G6, Cannon Fall 2017 Member of USF Tampa, Team S3-G6, Cannon Fall 2017

USFT-CANNON-F17S3G6

3 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 7

Past 30 Days: 29

All Time: 238