Introduction

This guide can be used if the optical drive is malfunctioning. Removing the optical drive is also required before the main cover can be opened up.

Parts

No parts required.

  1. Remove the three 6mm Phillips #0 screws holding the back access panel on. Remove the three 6mm Phillips #0 screws holding the back access panel on.
    • Remove the three 6mm Phillips #0 screws holding the back access panel on.

  2. Slide the cover toward you to unlatch it. The edge of the panel will slide away from  the  laptop so it can be lifted.
    • Slide the cover toward you to unlatch it.

    • The edge of the panel will slide away from the laptop so it can be lifted.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Remove one 6mm Phillips #0 screw holding in the optical drive. Remove one 6mm Phillips #0 screw holding in the optical drive.
    • Remove one 6mm Phillips #0 screw holding in the optical drive.

  5. Grab the optical drive by the edge and pull it out. Grab the optical drive by the edge and pull it out.
    • Grab the optical drive by the edge and pull it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 14

All Time: 110