Introduction

This guide will illustrate how to remove the back panel.

  1. Lay the computer down with the bottom panel facing up.
    • Lay the computer down with the bottom panel facing up.

    Add Comment

  2. Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.
    • Locate the ten 6mm Phillips screws along the edges and in the center of the back panel.

    • Remove all ten 6mm Phillips screws with a size 0 Phillips screwdriver.

    Add Comment

    • Wedge the plastic opening tool into the small space under the back panel.

    • Use the plastic opening tool as a lever to separate the bottom panel from the computer.

    • Slide the tool along the edges of the computer until the bottom panel is completely separated.

    • You may start prying the bottom panel on any edge.

    Add Comment

    • Lift the bottom panel off of the computer.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Geoff Bentz

Member since: 03/09/2016

850 Reputation

5 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 30