Introduction

The USB cable is what connects the toy pad to the video game console, allowing you to play the game. This guide shows how to remove the USB cable from the toy pad.

Parts

No parts required.

Be careful not to crack the cover.
  • Be careful not to crack the cover.

  • Use the metal spudger to gently pry open the corners of the top cover.

Add Comment

Be careful not to crack the top cover.
  • Be careful not to crack the top cover.

  • Use the metal spudger to gently pry up the center of the top cover.

Add Comment

  • Pull the top cover off.

Add Comment

  • Lift up the circular illumination stand and remove it from the toy pad.

Add Comment

  • Lift up the white L-shaped pieces and remove them from the toy pad.

Add Comment

  • Pull the white connector away from the motherboard, keeping the white connector parallel to the board.

    • You may need to use a plastic opening tool or spudger to help separate the connector. Avoid pulling firmly on the wires themselves.

  • Remove the USB cable from the toy pad.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Alyssa Lach

Member since: 11/06/2017

431 Reputation

4 Guides authored

Team

IUPUI, Team S5-G2, Baechle Fall 2017 Member of IUPUI, Team S5-G2, Baechle Fall 2017

IUPUI-BAECHLE-F17S5G2

3 Members

4 Guides authored

2 Comments

Where do you buy the USB cable from?

jaimea371 - Reply

Where do you buy the USB cable from?

mguzmanv - Reply

Add Comment

View Statistics:

Past 24 Hours: 5

Past 7 Days: 21

Past 30 Days: 105

All Time: 1,347