Introduction

This guide will show you how to replace the joy stick on the controller.

Use the Metal Spudger to push the release clip on the battery cover.
  • Use the Metal Spudger to push the release clip on the battery cover.

Lift the cover off.
  • Lift the cover off.

The battery holder is now visible with the removal of the cover.
  • The battery holder is now visible with the removal of the cover.

Use the screwdriver to remove the eight 8.7 mm  PH1 Phillips head screws.
  • Use the screwdriver to remove the eight 8.7 mm PH1 Phillips head screws.

New Battery = Faster iPhone
Fix Kits starting at $16.99
Separate the top and bottom parts of the controller slightly.
  • Separate the top and bottom parts of the controller slightly.

Slide the cover on the back side of the controller covering the joy stick out of the way.
  • Slide the cover on the back side of the controller covering the joy stick out of the way.

Use the screwdriver to remove the four 8.7 mm  PH1 Phillips head screws.
  • Use the screwdriver to remove the four 8.7 mm PH1 Phillips head screws.

Turn and lift the circuit board with button attacked out of the hole.  Do not detach the circuit.
  • Turn and lift the circuit board with button attacked out of the hole. Do not detach the circuit.

Hold the circuit board and button and pull the button off.
  • Hold the circuit board and button and pull the button off.

Joystick will now pop off.
  • Joystick will now pop off.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joshua Jones

Member since: 03/23/2017

101 Reputation

1 Guide authored

Team

IUPUI, Team S4-G2, Baechle Spring 2017 Member of IUPUI, Team S4-G2, Baechle Spring 2017

IUPUI-BAECHLE-S17S4G2

3 Members

3 Guides authored

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 5

Past 30 Days: 10

All Time: 103