Introduction

If there is no sound coming from your device there is a good chance your speakers are broken. This guide will show you how to replace the speakers in the Leader Impression i10A-LE tablet.

Image 1/1:
  • Start with your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

Add Comment

Image 1/3: Using the plastic tools slide the flat end into the device. Image 2/3: Gently pry the back piece until you hear a popping noise. Image 3/3: Once the back is loose, remove it from the device and set aside.
  • Start by prying the back off by using plastic opening tools

  • Using the plastic tools slide the flat end into the device.

  • Gently pry the back piece until you hear a popping noise.

  • Once the back is loose, remove it from the device and set aside.

Add Comment

Image 1/3: Follow both sets of speaker wires to the motherboard where they are  connected. Image 2/3: Desolder the wire connections from the motherboard. Image 3/3: Desolder the wire connections from the motherboard.
  • Use the spudger to pry both of the speakers from the tablet.

  • Follow both sets of speaker wires to the motherboard where they are connected.

  • Desolder the wire connections from the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

jcg

Member since: 11/14/2016

101 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 35