Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Introduction

Removing and replacing the microphone for the Leader Impression i10A-LE.

  1. Orient your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.
    • Orient your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

  2. Pry the back off by using plastic opening tools. Using the plastic tools slide the flat end into the device. Gently pry the back piece until you hear a popping noise.
    • Pry the back off by using plastic opening tools.

    • Using the plastic tools slide the flat end into the device.

    • Gently pry the back piece until you hear a popping noise.

    • Once the back is loose, remove it from the device and set aside.

  3. Disconnect the positive and negative battery leads. Remove the microphone from plastic housing with the tweezers.
    • Disconnect the positive and negative battery leads.

    • Remove the microphone from plastic housing with the tweezers.

    • Desolder the positive (red) and negative (black) power leads.

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 64