Image 1/1:
  • Start with your Leader Impression i10A-LE with the word "Impression" closest to you and the camera in the top left corner.

Add Comment

Image 1/3: Once cracked, use more plastic prying tools to fully remove the back panel. A popping noise will occur when each clip is opened. Image 2/3: Remove the back panel and set aside. Image 3/3: Remove the back panel and set aside.
  • Use the plastic prying tools to crack open the back of the device.

  • Once cracked, use more plastic prying tools to fully remove the back panel. A popping noise will occur when each clip is opened.

  • Remove the back panel and set aside.

Add Comment

Image 1/2: Use a spudger to pry the battery pack from the glue. Image 2/2: Desolder the positive (red) and negative (black) power leads.
  • The battery pack is glued to the device.

  • Use a spudger to pry the battery pack from the glue.

  • Desolder the positive (red) and negative (black) power leads.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 9

All Time: 102