Fix Your Stuff Community Store

Lasko 20" Wind Machine Blade Replacement

Introduction

This is my guide on how to open a 20” Lasko Wind Fan to remove or replace the blade. This guide can increase the life of the fan. It also shows you how to access the inside of the fan to clean it. This is helpful for dust build up, and prolonging the life of your fan. Also, replacing the blade can increase the life span. Be sure to turn off and unplug this device before cleaning or placing your inside of it.

What you need

  1. Lasko 20" Wind Machine Blade Replacement, Blade: step 1, image 1 of 1

    • Unplug the power cord.

    Edit

  2. Lasko 20" Wind Machine Blade Replacement: step 2, image 1 of 3 Lasko 20" Wind Machine Blade Replacement: step 2, image 2 of 3 Lasko 20" Wind Machine Blade Replacement: step 2, image 3 of 3

    • Wipe off and dust the front and back grill of the fan.

    Edit

  4. Lasko 20" Wind Machine Blade Replacement: step 3, image 1 of 3 Lasko 20" Wind Machine Blade Replacement: step 3, image 2 of 3 Lasko 20" Wind Machine Blade Replacement: step 3, image 3 of 3

    • Use the Phillips #0 screwdriver to remove four 8.8 mm screws that are marked on the back of the grill.

    Edit

  5. Lasko 20" Wind Machine Blade Replacement: step 4, image 1 of 2 Lasko 20" Wind Machine Blade Replacement: step 4, image 2 of 2

    • Unlatch the top of the fan to separate the grill and reveal the blade.

    Edit

  6. Lasko 20" Wind Machine Blade Replacement: step 5, image 1 of 2 Lasko 20" Wind Machine Blade Replacement: step 5, image 2 of 2

    • Grab both sides of the blade and twist counter clockwise to remove it from the base axel attached to the back grill.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

3 Comments

Recherche moteur lasko windmachin 3300

Boso de la pascuala - Reply

Recherche moteur lasko windmachine 3300

Boso de la pascuala - Reply

Grip n twist is not as simple.

Then whatcafter removing? Stopped working n cleaned still not starting. What next after blade removal?

Dawn S - Reply

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 9

Past 30 Days: 46

All Time: 2,742