Fix Your Stuff Community Store

Sony Bloggie 3D Player Back Cover Replacement

Introduction

This guide will detail the steps necessary to remove the back cover of the Sony Bloggie 3D Player.

What you need

  1. Sony Bloggie 3D Player Back Cover Replacement, Front Cover: step 1, image 1 of 1

    • Remove the two 2.5mm Phillips #00 screws using the Philips #00 screwdriver.

    Edit

  2. Sony Bloggie 3D Player Back Cover Replacement: step 2, image 1 of 2 Sony Bloggie 3D Player Back Cover Replacement: step 2, image 2 of 2

    • Use a plastic opening tool to pry the cover open.

    • After the the cover is partly open as shown, remove the cover with your hands.

    Edit

  4. Sony Bloggie 3D Player Back Cover Replacement, Back Cover: step 3, image 1 of 2 Sony Bloggie 3D Player Back Cover Replacement, Back Cover: step 3, image 2 of 2
    Tool used on this step:
    Tweezers
    $4.99
    Buy

    • Using your hand, or a pair of tweezers, remove the ZIF connector by gently pulling it out of the dock on the circuit board.

    Edit

  5. Sony Bloggie 3D Player Back Cover Replacement: step 4, image 1 of 2 Sony Bloggie 3D Player Back Cover Replacement: step 4, image 2 of 2

    • Use a plastic opening tool to loosen the back cover off the device.

    • Once the back cover is loose, remove it gently by hand.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 7 other contributors

Timothy Tran

Member since: 01/30/13

1 Reputation

2 Guides authored

Badges: 4

+1 more badge

Team

Cal Poly, Team 7-12, Maness Winter 2013 Member of Cal Poly, Team 7-12, Maness Winter 2013

CPSU-MANESS-W13S7G12

5 Members

15 Guides authored

0 Guide Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 486