Remove the two plastic screw covers below the inside phone screen. Remove the two plastic screw covers below the inside phone screen.
  • Remove the two plastic screw covers below the inside phone screen.

Add Comment

Unscrew both screws using a Torx T6 screwdriver.
  • Unscrew both screws using a Torx T6 screwdriver.

Add Comment

Pry off screen front cover with a straight 3mm screwdriver. Pry off screen front cover with a straight 3mm screwdriver. Pry off screen front cover with a straight 3mm screwdriver.
  • Pry off screen front cover with a straight 3mm screwdriver.

Add Comment

Pry off the speaker which is glued on to the front cover using a Small Flathead Screwdriver. Pry off the speaker which is glued on to the front cover using a Small Flathead Screwdriver. Pry off the speaker which is glued on to the front cover using a Small Flathead Screwdriver.
  • Pry off the speaker which is glued on to the front cover using a Small Flathead Screwdriver.

Add Comment

Unsolder the black and red wires of the speaker from where they are attached to the base of the screen.
  • Unsolder the black and red wires of the speaker from where they are attached to the base of the screen.

Add Comment

Obtain replacement speaker and solder the new black and red wires back onto base of the screen.
  • Obtain replacement speaker and solder the new black and red wires back onto base of the screen.

Add Comment

Apply glue to the back of the speaker and place it back in its original position.
  • Apply glue to the back of the speaker and place it back in its original position.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Nicholas Schmidt

Member since: 10/09/2010

34 Reputation

7 Guides authored

Team

Cal Poly, Team 3-25, Regan Fall 2010 Member of Cal Poly, Team 3-25, Regan Fall 2010

CPSU-REGAN-F10S3G25

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 705