Skip to main content

Fix Your Stuff

Right to Repair

Store

Introduction

In order to replace your battery you are going to need the proper tools. There are screws that need to be unscrewed and components that need to be pried open carefully. The tools needed will be plastic opening tools, 000PH screwdriver and tweezers. With these prepared everything should be ready to start the replacement of the battery for the LG Watch Urbane.

  1. Push on the band in order to expose the pins Using tweezers, remove the pins, one on each side, in order to only leave the face of the watch.
    • Push on the band in order to expose the pins

    • Using tweezers, remove the pins, one on each side, in order to only leave the face of the watch.

  2. Using plastic opening tools, carefully pry open the back cover of the the watch. Use the little hatch on the bottom portion of the watch in order to easily pry open the watch
    • Using plastic opening tools, carefully pry open the back cover of the the watch.

    • Use the little hatch on the bottom portion of the watch in order to easily pry open the watch

    • Using a PH000 screwdriver, remove the three screws in order to release the motherboard from the watch.

    • Do not lose the three screws! Keep them somewhere you will remember! A magnetic mat can help with this. Ifixit Magnetic Mat

    • Using plastic opening tools, remove the four connectors attached to the motherboard

  3. Using the plastic opening tools, carefully lift up the motherboard. IGNORE THIS STEP IF ONLY REMOVING MOTHERBOARD:             Use the plastic opening tools to carefully remove the battery IGNORE THIS STEP IF ONLY REMOVING MOTHERBOARD:             Use the plastic opening tools to carefully remove the battery
    • Using the plastic opening tools, carefully lift up the motherboard.

    • IGNORE THIS STEP IF ONLY REMOVING MOTHERBOARD: Use the plastic opening tools to carefully remove the battery

Conclusion

To reassemble your device, follow these instructions in reverse order.

14 other people completed this guide.

Rey Diaz

Member since: 08/31/2015

603 Reputation

2 Guides authored

Team

USF Tampa, Team 1-4, Remmell Fall 2015 Member of USF Tampa, Team 1-4, Remmell Fall 2015

USFT-REMMELL-F15S1G4

4 Members

4 Guides authored

8 Comments

"pried" not "pryed"

Patty Remmell - Reply

Where do I find a replacement battery?

nickpfau - Reply

Found mine on ebay. Search for BL-S3 battery.

Atreidae -

The reassembly requires gluing the back together. How do you get the glue?

jiteshshahin - Reply

There is glue around cover. I suppose when closing we should add glue to be waterproof again? Nothing about it in the guide, beside that ok.

Imx - Reply

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 27

Past 30 Days: 141

All Time: 11,974