Image 1/2: Remove the back cover of the cellphone by sliding the tab away from the phone using one finger. Image 2/2: Remove the back cover of the cellphone by sliding the tab away from the phone using one finger.
  • Turn the cell phone off.

  • Remove the back cover of the cellphone by sliding the tab away from the phone using one finger.

Add Comment

Image 1/1: Carefully remove the battery and set it aside.
  • Lift one side of the battery using a plastic opening tool or your fingers.

  • Carefully remove the battery and set it aside.

Add Comment

Image 1/1:
  • When installing the battery, make sure to align the metal pins with those of the phone

Add Comment

Image 1/1: Locate the two grey rubber plugs on the LCD portion of the phone. These plugs cover up two screws.
  • Turn your phone around and open the flip phone.

  • Locate the two grey rubber plugs on the LCD portion of the phone. These plugs cover up two screws.

  • Remove the two grey screw-covers at the bottom of the screen

Add Comment

Image 1/2: There is a gap between the case and the screen near the ear piece Image 2/2: Insert the plastic opening tool in the gap and pry the screen up.
  • Remove the screen by using the tab to eject the screen.

    • There is a gap between the case and the screen near the ear piece

    • Insert the plastic opening tool in the gap and pry the screen up.

  • The plastic screen cover is glued onto the phone, do not be alarmed if it may be difficult to pry it off.

Add Comment

Image 1/1:
  • Unscrew the four corner 3.21mm screws to separate the the top cover of the phone

Add Comment

Image 1/2: Remove the top cover of the phone by inserting the plastic opening tool into the groove. Image 2/2: Carefully open the cover.
  • Turn your phone around

  • Remove the top cover of the phone by inserting the plastic opening tool into the groove.

  • Carefully open the cover.

Add Comment

Image 1/1: The ear piece is the black component that is located at the top with black and red wires
  • Desolder the top ear piece using a soldering iron to remove the component

  • The ear piece is the black component that is located at the top with black and red wires

Add Comment

Image 1/2: Image 2/2:
  • Remove the ear piece from the phone by lifting it using a plastic opening tool.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Stanley Thomas

Member since: 01/20/2012

38 Reputation

4 Guides authored

Team

Cal Poly, Team 8-16, Maness Winter 2012 Member of Cal Poly, Team 8-16, Maness Winter 2012

CPSU-MANESS-W12S8G16

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 892