Introduction

This guide is for dismantling the body of the LG VX6000, a step that is required for many other repairs

Parts

No parts required.

Push the dark gray tab towards the top of the phone to release the battery.  The tab is located on the back of the phone.
  • Push the dark gray tab towards the top of the phone to release the battery. The tab is located on the back of the phone.

Remove battery

Ryan Brekke - Reply

Remove battery pack.
  • Remove battery pack.

  • You will need to unhook the bottom of the battery pack from the slot.

Add Comment

Set the battery aside.
  • Set the battery aside.

Add Comment

Pull the two rubber cushions out using tweezers.
  • Pull the two rubber cushions out using tweezers.

  • Only remove the two cushions that are circled!

Add Comment

Unscrew the six screws seen on the back using a Phillips 00 Screwdriver.
  • Unscrew the six screws seen on the back using a Phillips 00 Screwdriver.

  • Remove screws carefully on an uncluttered surface. They are very small, and could get lost.

Add Comment

Remove the back of the phone using your hands.
  • Remove the back of the phone using your hands.

  • There is a pair of red and blue wires that plugs into the logic board. These wires will snap if you force the pieces apart.

  • Remove the back of the phone very gently. Use your fingernail or tweezers to unplug the wires.

  • To reattach the back, you must plug these wires back in.

Add Comment

Finish Line

Barrett Wallace

Member since: 01/18/2010

1 Reputation

2 Guides authored

Team

Cal Poly, Team 4-11, Forte Winter 2010 Member of Cal Poly, Team 4-11, Forte Winter 2010

CPSU-FORTE-W10S4G11

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,997