Image 1/3: Locate the hidden screw as shown in the picture and remove the rubber piece with tweezers. Image 2/3: Remove the screw using a Philips #00 screwdriver. Image 3/3: Remove the screw using a Philips #00 screwdriver.
  • First, see which side speaker needs to be replaced.

  • Locate the hidden screw as shown in the picture and remove the rubber piece with tweezers.

  • Remove the screw using a Philips #00 screwdriver.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Using a guitar pick or any opening tool, open the frame of the headset.

Add Comment

Image 1/1:
  • Using a Philips #00 screwdriver remove the screw holding the motherboard in place.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Slightly push back on the speaker back housing so the speaker can be pushed out as seen in the pictures.

Add Comment

Image 1/2: Image 2/2:
  • Once the speaker is out of the way, the hidden screw can be removed using a Philips #00 screwdriver.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Using a pry/opening tool, slightly lift the speaker and motherboard out of place.

Add Comment

Image 1/2: Image 2/2:
  • Use a soldering iron to desolder the speaker from the motherboard.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Faizan Naveed

Member since: 04/12/2017

1,388 Reputation

8 Guides authored

Team

Mobile Device Repair Factory Member of Mobile Device Repair Factory

Business

1 Member

8 Guides authored

2 Comments

Thanks for such a thorough guide! Would you happen to know where I could find replacement parts without buying whole units on ebay?

Jordan Heilman - Reply

Your welcome! Not sure where you can buy just replacement parts at the moment. Best bet would be to buy a unit for parts on ebay or amazon.

Faizan Naveed -

Add Comment

View Statistics:

Past 24 Hours: 10

Past 7 Days: 62

Past 30 Days: 244

All Time: 631