Introduction

The microphone below the keypad.

Parts

No parts required.

Unscrew Antenna
  • Unscrew Antenna

Add Comment

Pull Antenna from socket
  • Pull Antenna from socket

Add Comment

Turn Phone over
  • Turn Phone over

Add Comment

Pull up tab on top
  • Pull up tab on top

Add Comment

Remove the battery
  • Remove the battery

Add Comment

Unscrew the four screws behind the battery
  • Unscrew the four screws behind the battery

Add Comment

Pull off back cover Do not separate the covers
  • Pull off back cover

    • Do not separate the covers

    • Do not rip the tape connecting the two covers

Add Comment

Remove back cover
  • Remove back cover

Add Comment

Pry the circuit board from front cover Do not let number pad fall out
  • Pry the circuit board from front cover

    • Do not let number pad fall out

Add Comment

Pry out microphone with opening tool
  • Pry out microphone with opening tool

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Johnny Inlow

Member since: 04/10/2010

19 Reputation

3 Guides authored

Team

Cal Poly, Team 27-91, Amido Spring 2010 Member of Cal Poly, Team 27-91, Amido Spring 2010

CPSU-AMIDO-S10S27G91

5 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,139