Skip to main content

Introduction

This guide will walk you through the process of replacing a speaker in an LG Phoenix 2. A speaker replacement may be needed if no sound comes out of the speaker.

The speaker model used in this phone is a KRP621 W1P speaker.

  1. Place a fingernail in the notch at the bottom edge of the phone. Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge. Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.
    • Place a fingernail in the notch at the bottom edge of the phone.

    • Pull on the back cover with one hand while keeping the rest of the phone steady, and run your fingernail along the edge.

  2. Place a fingernail in the notch at the bottom edge of the battery. Pull the battery out. Pull the battery out.
    • Place a fingernail in the notch at the bottom edge of the battery.

    • Pull the battery out.

  3. Locate the SIM card in the top right corner on the back of the phone. Remove the SIM card by pushing it with your thumb from left to right.
    • Locate the SIM card in the top right corner on the back of the phone.

    • Remove the SIM card by pushing it with your thumb from left to right.

  4. MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now

    MacBook Battery Fix Kits

    Starting at $69.99

    Buy Now
  5. Remove all 9 screws on the back by using a Phillips head #J00 screwdriver. To remove the screws rotate them counterclockwise. To remove the screws rotate them counterclockwise.
    • Remove all 9 screws on the back by using a Phillips head #J00 screwdriver.

    • To remove the screws rotate them counterclockwise.

  6. Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone). Pry the bottom shield to separate it from the phone. Once it is loose you should be able to remove it with your hand.
    • Insert a plastic opening tool in the split at the bottom of the phone (between the bottom shield and the rest of the phone).

    • Pry the bottom shield to separate it from the phone.

    • Once it is loose you should be able to remove it with your hand.

  7. Insert the flat end of the Spudger between the screen and the chromed frame. Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield. Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.
    • Insert the flat end of the Spudger between the screen and the chromed frame.

    • Once inserted, run the Spudger along the frame to separate the front part of the phone from the back shield.

  8. Remove the speaker by using the Spudger. Remove the speaker by using the Spudger. Remove the speaker by using the Spudger.
    • Remove the speaker by using the Spudger.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Esteban Ruibal

Member since: 02/14/2018

684 Reputation

5 Guides authored

Team

USF Tampa, Team S2-G2, Eyestone Spring 2018 Member of USF Tampa, Team S2-G2, Eyestone Spring 2018

USFT-EYESTONE-S18S2G2

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 5

All Time: 139