Introduction

If the speaker is blown or no sound is coming out this will show you how to replace a broken speaker.

  1. Use a plastic opening tool to remove the back cover.
    • Use a plastic opening tool to remove the back cover.

  2. Use a plastic opening tool to remove the battery, lifting from the bottom right corner.
    • Use a plastic opening tool to remove the battery, lifting from the bottom right corner.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Use a Phillips #00 Screwdriver to remove all eight 4mm screws.
    • Use a Phillips #00 Screwdriver to remove all eight 4mm screws.

  5. Use a plastic opening tool to remove the back trim by working around all of the edges. Use a plastic opening tool to remove the back trim by working around all of the edges.
    • Use a plastic opening tool to remove the back trim by working around all of the edges.

  6. Remove the volume buttons from the side. Remove the volume buttons from the side.
    • Remove the volume buttons from the side.

  7. Use a plastic opening tool to lift the speaker off by prying under the silver square as shown. Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.
    • Use a plastic opening tool to lift the speaker off by prying under the silver square as shown.

    • Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Daniela Allbright

Member since: 10/08/2014

605 Reputation

3 Guides authored

Team

USF Tampa, Team 14-1, Leahy Fall 2014 Member of USF Tampa, Team 14-1, Leahy Fall 2014

USFT-LEAHY-F14S14G1

3 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 153