Introduction

Replacing the rear facing camera that is malfunctioning or has a cracked lens and is unusable.

Image 1/1:
  • Use a plastic opening tool to remove the back cover.

Add Comment

Image 1/1:
  • Use a plastic opening tool to remove the battery, lifting from the bottom right corner.

Add Comment

Image 1/1:
  • Use a Phillips #00 Screwdriver to remove all eight 4mm screws.

Add Comment

Image 1/2: Image 2/2:
  • Use a plastic opening tool to remove the back trim by working around all of the edges.

Add Comment

Image 1/2: Image 2/2:
  • Remove the volume buttons from the side.

Add Comment

Image 1/2: Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed. Image 2/2: Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.
  • Use a plastic opening tool to lift the speaker off by prying under the silver square as shown.

  • Note: There is a small tab underneath the speaker that will be lifted off when the speaker is removed.

Add Comment

Image 1/1:
  • Pry slightly underneath the tab attached to the camera until it pops off.

Add Comment

Image 1/1:
  • Use tweezers to remove the camera, you will need to use some force as it is glued on.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Zarna Patel

Member since: 10/08/2014

287 Reputation

2 Guides authored

Team

USF Tampa, Team 14-1, Leahy Fall 2014 Member of USF Tampa, Team 14-1, Leahy Fall 2014

USFT-LEAHY-F14S14G1

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 135