Introduction
Use this guide to replace the rear case on your LG G Watch.
What you need
-
-
Tool used on this step:Tweezers$4.99
-
First, slide the wristband down on the spring bar to expose the shoulder of the spring bar.
-
Grasp the exposed shoulder with the tweezers to perform the next step.
Ask FixBot
-
-
-
Use the tweezer to depress the spring bar so that it collapses by a few millimeters and pops out of the hole that was holding it in place.
-
Now carefully pull the other end of the spring bar to detach the wristband from the watch face.
-
-
-
-
-
-
Use the T5 Torx screwdriver to unscrew the four silver 2mm x 3mm T5 screws that hold the back cover in place.
-
-
-
Slide the opening pick between the rear case and the rest of the device to separate the two halves.
-
Gently pull the two halves apart.
-
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
