LG Encore GT550 Camera Replacement
Lindsey Harding and 6 other contributors
Last updated on Jun 10, 2021
Views: 632
View statistics:
- Past 24 Hours:
- 4
- Past 7 Days:
- 27
- Past 30 Days:
- 97
- All Time:
- 632
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 0 1
No one has marked this guide "completed." Will you be the first?
1 person has marked this guide "completed." It's you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Introduction
Go to step 1 ↓Use this guide to replace the LG Encore GT550 phone’s camera if it is not working correctly. The camera is connected to the motherboard by a cable on the inside of the phone. Sometimes these cables become damaged, which can stop the camera from working. These instructions will show you how to remove the outer casing of the phone, and install the new camera.
Use clean, dry hands while handling the inner parts of the phone. No special skills are required for this guide.
What you need
Tools
-
-
-
Remove the six screws around the outside of the phone using a Phillips #0 screwdriver.
-
-
-
Hook the iFixit opening tool onto the side of the front panel.
-
Pry away from the phone with the opening tool to remove the front panel.
-
-
-
-
Insert the small end of the opening tool between the motherboard and the side of the phone.
-
Use leverage to remove the motherboard.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Team
UMass Dartmouth, Team 1-4, Shastany Fall 2013 Member of UMass Dartmouth, Team 1-4, Shastany Fall 2013
UMASSD-SHASTANY-F13S1G4
2 Members
60 Guides authored
