Introduction
A camera in a device captures moments and memories, but with extensive use, the camera component may encounter issues or stop functioning properly. If you've noticed blurry images, black screens, or error messages when trying to access your camera, it could indicate a problem with the camera module itself.
In this guide, we'll walk you through the steps to safely remove and replace the camera in the LG Enact. This guide will help you address potential camera-related issues. Remember to power off your device before starting the camera replacement process to ensure a safe and effective procedure.
What you need
-
-
Open the back cover by prying into the bottom tab with an iFixit opening tool.
Ask FixBot
-
-
-
Remove the three 1.2 mm screws from the speaker using a Phillips #00 screwdriver.
-
-
-
-
Remove the nine 1.2 mm screws from the midframe using a Phillips #00 screwdriver.
-
-
Tool used on this step:Tweezers$4.99
-
Using tweezers, remove the camera assembly connector.
-
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Team
University of North Texas, Team 4-11, Harold Fall 2023 Member of University of North Texas, Team 4-11, Harold Fall 2023
UNT-HAROLD-F23S4G11
4 Members
5 Guides authored
