Danger
Potentially Dangerous
Injury may result if this procedure is not followed properly. Use caution and follow all warnings.
Danger

Introduction

This guide will show you how to open up your Blu-ray player and remove the power cord if it is faulty and causing problems related to powering the device.

Parts

No parts required.

Ensure the device is unplugged to prevent shocks. Remove the three black 3/16” Phillips #2 screws from the backside of the player.
  • Ensure the device is unplugged to prevent shocks.

  • Remove the three black 3/16” Phillips #2 screws from the backside of the player.

  • With the backside (audio/video jacks) facing you, lift the part of the cover closer to you and pull until it is off.

Add Comment

Beware of the capacitors as they may shock you when touched. Detach the power supply cord from the brown logic board by pushing the locking clip on the connector, and pulling out. The connector may be difficult to remove. Wiggling it while pulling out may help release it.
  • Beware of the capacitors as they may shock you when touched.

  • Detach the power supply cord from the brown logic board by pushing the locking clip on the connector, and pulling out.

    • The connector may be difficult to remove. Wiggling it while pulling out may help release it.

  • Remove the power cord from the panel by carefully sliding it upwards from its seating.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 other people completed this guide.

Bart Quicho

Member since: 01/13/2015

448 Reputation

3 Guides authored

Team

UW Tacoma, Team 1-1, Rose Winter 2015 Member of UW Tacoma, Team 1-1, Rose Winter 2015

UWT-ROSE-W15S1G1

4 Members

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 21

All Time: 478