Introduction

This guide will show you how to replace your front & back camera of your Kurio Touch 4S

Image 1/1:
  • Make sure to open the back cover easily using the plastic opening tool.

Add Comment

Image 1/3: The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides. Image 2/3: The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides. Image 3/3: The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.
  • Remove back cover by prying away from the Kurio.

  • The easiest place to remove the cover is from the bottom and top; try to open it from right to left sides.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • To remove the battery, make sure the four 5mm Philips screws on each side of your device is open using the philips#1 Screwdriver.

Add Comment

Image 1/1: All these screws are identical so don't worry if you miss them up.
  • After you remove your four 5mm Philips screws, use your plastic opening tool to help you open the plastic cover of your device.

  • All these screws are identical so don't worry if you miss them up.

Add Comment

Image 1/1: Do not remove the wires that are attached to the battery and the motherboard.
  • Remove the battery because it blocks the plastic shield that covers the camera.

  • Do not remove the wires that are attached to the battery and the motherboard.

Add Comment

Image 1/1:
  • Remove the plastic cover that is covering the camera area using tweezers.

Add Comment

Image 1/2: Gently use a brush to remove any dirt or finger prints around the area. Image 2/2: Use the Tweezers to detach the front and back camera from its place.
  • Separate the two halves of your Kurio Touch 4S.

  • Gently use a brush to remove any dirt or finger prints around the area.

  • Use the Tweezers to detach the front and back camera from its place.

Add Comment

Image 1/2: Image 2/2:
  • Remove the copper wires by using the Tweezers to replace your new camera.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Khalid AlTamimi

Member since: 01/21/2015

251 Reputation

2 Guides authored

Team

USF Tampa, Team 6-5, Brown Winter 2015 Member of USF Tampa, Team 6-5, Brown Winter 2015

USFT-BROWN-W15S6G5

3 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 182