Fix Your Stuff Community Store

Kurio Motion Speakers Replacement

Introduction

Does your tablet give out poor sound or does not give sound at all? It is probably time to change your speakers. Refer to this guide to learn how to change your speakers. This will require you to solder so use this guide to help.

What you need

  1. Kurio Motion Speakers Replacement, Speakers: step 1, image 1 of 1

    • Use the Phillips #0 Screwdriver to remove four 5mm screws from sides of the device.

    Edit

  2. Kurio Motion Speakers Replacement: step 2, image 1 of 1

    • Use the Ifixit opening tool to pry open the device to remove the back of the Kurio Motion.

    Edit

  4. Kurio Motion Speakers Replacement: step 3, image 1 of 1

    • Remove the tape covering the tape from the edges of the battery.

    Edit

  5. Kurio Motion Speakers Replacement: step 4, image 1 of 1

    • Use your soldering tool to solder the wires that are connected to the motherboard. There should be four wires.

    Edit

  6. Kurio Motion Speakers Replacement: step 5, image 1 of 1

    • Use your spudger to carefully pry out the speakers from underneath.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

with 1 other contributor

Yazeed Ayyad

Member since: 09/10/23

447 Reputation

3 Guides authored

Badges: 3

Team

University of New Orleans, Team 3-7, McDonald Fall 2023 Member of University of New Orleans, Team 3-7, McDonald Fall 2023

UNO-MCDONALD-F23S3G7

3 Members

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 16