Introduction

The SD Memory Card must be inserted for the camera to function. If a card has not been inserted, a "no-card" warning is displayed on the LCD monitor when the camera is turned on.

  1. Open the memory card chamber on the bottom panel of the camera.
    • Open the memory card chamber on the bottom panel of the camera.

    Add Comment

  2. Push to eject the old memory card out of place.
    • Push to eject the old memory card out of place.

    Add Comment

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Insert the new memory card in. Make sure that it is inserted in the appropriate direction.

    Add Comment

    • Close the memory chamber and start the camera again.

    Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Hieu Ngo

Member since: 03/22/2017

419 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 2

Past 30 Days: 3

All Time: 143