Introduction

Use this guide to replace the back cover.

Parts

No parts required.

Remove the two 6.2mm Phillips screws on both sides of camera's back cover. Remove the two 6.2mm Phillips screws on both sides of camera's back cover.
  • Remove the two 6.2mm Phillips screws on both sides of camera's back cover.

Add Comment

Turn camera so the bottom is facing up and the front is facing away.
  • Turn camera so the bottom is facing up and the front is facing away.

  • Remove the two 6.2mm Phillips screws on the bottom back cover of the camera.

  • Back cover is now unscrewed an can be removed.

Add Comment

Have the back of the camera facing up.
  • Have the back of the camera facing up.

  • Unscrew the 6.2mm Phillips screw next to the viewfinder.

  • The back cover is now unscrewed. Lift up and pull the cover off evenly.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Michelle

Member since: 04/04/2011

86 Reputation

5 Guides authored

Team

Cal Poly, Team 25-28, Garner Spring 2011 Member of Cal Poly, Team 25-28, Garner Spring 2011

CPSU-GARNER-S11S25G28

4 Members

6 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

All Time: 975