Introduction

The colored panel of this camera can easily become cracked or damaged. This guide will show you how to remove it, so you can easily replace it.

Image 1/2: Image 2/2:
  • First, press in and slide forward the battery latch as indicated by the arrow.

Add Comment

Image 1/1:
  • Press down on battery until you hear a click and release it. Battery should easily slide out.

Add Comment

Image 1/3: Using a magnetized surface to keep from losing screws may be very helpful. Image 2/3: Using a magnetized surface to keep from losing screws may be very helpful. Image 3/3: Using a magnetized surface to keep from losing screws may be very helpful.
  • Obtain screwdriver, and remove the 3.85 mm frame screws as highlighted.

    • Using a magnetized surface to keep from losing screws may be very helpful.

Add Comment

Image 1/2: Image 2/2:
  • After screws are removed, using both hands, carefully pull the frame apart from the camera as indicated.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 79