Introduction

Use this guide to remove the back case.

Parts

No parts required.

Position the camera with the bottom facing up. With your finger, slide the battery cover in the direction of open arrow. The battery cover will spring open, so be careful to lift it up gently.
  • Position the camera with the bottom facing up.

  • With your finger, slide the battery cover in the direction of open arrow.

  • The battery cover will spring open, so be careful to lift it up gently.

Add Comment

Use a Phillips #00 screwdriver to remove the seven 4.5mm screws. There are 2 on the left There are 2 on the right
  • Use a Phillips #00 screwdriver to remove the seven 4.5mm screws.

    • There are 2 on the left

    • There are 2 on the right

    • There are 3 on the bottom

Add Comment

Firmly grasp and pull back casing off. Firmly grasp and pull back casing off. Firmly grasp and pull back casing off.
  • Firmly grasp and pull back casing off.

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Dustin Rodgers

Member since: 10/05/2010

50 Reputation

4 Guides authored

Team

Cal Poly, Team 7-51, Amido Fall 2010 Member of Cal Poly, Team 7-51, Amido Fall 2010

CPSU-AMIDO-F10S7G51

4 Members

7 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 1

All Time: 1,356