Fix Your Stuff Community Store

Kocaso M750B Battery Replacement

Introduction

Battery replacement is the process of removing the battery, you have to unsolder the wires connected to the motherboard. Replace the old battery with a new battery for better performance. Battery replacement is very important for the device as It plays an big part on how it performs, make sure to use safety tools while removing the battery. For safety guidelines on how to solder, go to this page.

What you need

  1. Kocaso M750B Battery Replacement, Backplate: step 1, image 1 of 3 Kocaso M750B Battery Replacement, Backplate: step 1, image 2 of 3 Kocaso M750B Battery Replacement, Backplate: step 1, image 3 of 3

    • Pry the edges of the tablet apart using an iFixit opening tool.

    Edit

  3. Kocaso M750B Battery Replacement, Battery: step 2, image 1 of 1

    • Desolder the solder joints that connect the motherboard to the battery.

    • The solder joints are connected to one red and one black cable.

    • When using the soldering iron, make sure to review the safety guidelines provided in the introduction. Work carefully and precisely to avoid any electrical discharge, puncture of the battery, or heating of the motherboard.

    Edit

  4. Kocaso M750B Battery Replacement: step 3, image 1 of 2 Kocaso M750B Battery Replacement: step 3, image 2 of 2

    • Pry the battery up using the flat end of a spudger.

    • Remove the adhesive under the battery and carefully lift it up to replace it.

    Edit
Conclusion

To reassemble your device, follow these instructions in reverse order, also to be very careful while removing the battery and use the safety tools.

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 34