Skip to main content

You're viewing a previously published version of this guide.  View latest version

Older Newer

Introduction

Removing the Kindle Voyage back panel is a necessity for replacing all the other parts of the device.

  1. Insert a plastic opening tool between the plastic panel shown on the device. Use the tool to pry the plastic away from the device.
    • Insert a plastic opening tool between the plastic panel shown on the device.

    • Use the tool to pry the plastic away from the device.

    • There will be adhesive holding this piece of plastic to the device. You may have to pull pretty hard to get it separated.

  2. Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture.
    • Use an aluminum driver attached with a Phillips head size #00 to remove the four 3mm screws shown in the picture.

  3. Once the screws are removed, the back panel can slide off the device. Once the screws are removed, the back panel can slide off the device. Once the screws are removed, the back panel can slide off the device.
    • Once the screws are removed, the back panel can slide off the device.

  4. Remove the magnetic component with the magnetic head of the aluminum driver. Remove the magnetic component with the magnetic head of the aluminum driver.
    • Remove the magnetic component with the magnetic head of the aluminum driver.

Sean Yap

Member since: 01/22/2015

1,085 Reputation

6 Guides authored

Team

Cal Poly, Team 19-12, Maness Winter 2015 Member of Cal Poly, Team 19-12, Maness Winter 2015

CPSU-MANESS-W15S19G12

5 Members

6 Guides authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 6

Past 30 Days: 19

All Time: 1,866