Difficulty
Moderate
Steps
4
Time Required
10 minutes
- Back Cover 2 steps
- Bezel 2 steps
Confusing Text
Some of this guide's text is confusing, duplicated, or off-topic. Clarify it by editing!
Introduction
If you have damage to the front plate,screen or need access to the screws behind the plate, this guide will tell you how to do so.
Parts
No parts required.
-
With the small plastic opening tool, undo the plastic clips around the back lid.
-
Gently lift the bottom and pull as the rest of the plastic guides are on a track.
-
Remove the six 4 mm screws in order to access the front plate. Use a Phillips #00 screwdriver.
-
Use a plastic opening tool to pry the top three sides of the bezel. Since there is glue under the bezel, gently pivot the face at the bottom off the Kindle and slide the clips out.
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
4 other people completed this guide.
Team
USF Tampa, Team 19-5, Blackwell Winter 2015 Member of USF Tampa, Team 19-5, Blackwell Winter 2015
USFT-BLACKWELL-W15S19G5
3 Members
8 Guides authored
