Introduction

You will need to use solder device in order to be able to replace the power button.

Parts

No parts required.

  1. Use a screwdriver to remove the four pictured 4mm screws. Use a screwdriver to remove the four pictured 4mm screws.
    • Use a screwdriver to remove the four pictured 4mm screws.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Slowly separate the cases of the device. Try not to damage the wires connecting the two pieces.
    • Slowly separate the cases of the device. Try not to damage the wires connecting the two pieces.

    • Keep the two pieces away from each other so you can follow the next step accordingly.

  4. Use the soldering iron to remove the broken switch. Push down on the metal locks to separate the switch from the motherboard.
    • Use the soldering iron to remove the broken switch.

    • Push down on the metal locks to separate the switch from the motherboard.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 other people completed this guide.

Amin

Member since: 02/13/2016

621 Reputation

5 Guides authored

Team

IUPUI, Team 1-1, Wilson Spring 2016 Member of IUPUI, Team 1-1, Wilson Spring 2016

IUPUI-WILSON-S16S1G1

4 Members

5 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 2

Past 7 Days: 2

Past 30 Days: 4

All Time: 195