Kia Rio Inner Car Door Handle Replacement
David Hicks and one other contributor
Last updated on Jun 18, 2019
Views: 5.4K
View statistics:
- Past 24 Hours:
- 9
- Past 7 Days:
- 23
- Past 30 Days:
- 138
- All Time:
- 5,356
Comments: 0
No one has left comments on this guide. Will you be first?
Go to guide commentsCompleted: 2 3
2 people have marked this guide "completed." Will you be next?
3 people have marked this guide "completed." Including you — great job!
Favorites: 0 1
No one has favorited (and subscribed to) this guide. Will you be the first?
1 person has favorited (and subscribed to) this guide — and that's you!
Introduction
Go to step 1 ↓This project will require taking off some bolts or screws that may be difficult to loosen. Although not required, an impact driver or impact wrench may be suggested. This is quite easy to follow but the individual steps may be difficult. If your car is older or live in a rainy place then the project may be difficult.
What you need
Tools
-
-
-
Remove window crank handle using the handle removal tool using the orientations seen in the first and second pictures.
-
-
-
-
Use a sharp knife to cut the strip calk connecting the top half of the moisture shield.
-
Pull the moisture shield half way down.
-
-
-
Remove the door handle from the door frame.
-
Remove the wires from the door handle.
-
Put on your replacement door handle.
-
Ask FixBot
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Team
Eastern Washington University, Team S25-G1, Crane Spring 2019 Member of Eastern Washington University, Team S25-G1, Crane Spring 2019
EWU-CRANE-S19S25G1
4 Members
36 Guides authored
