Skip to main content

This translation may not reflect the most recent updates from the source guide. Help update the translation or view the source guide.

Keyboard

What you need

  1. Keyboard, Keyboard Screws: step 1, image 1 of 1
    • Remove the two keyboard retaining screws.

  2. Keyboard, Unclip the Keyboard: step 2, image 1 of 3 Keyboard, Unclip the Keyboard: step 2, image 2 of 3 Keyboard, Unclip the Keyboard: step 2, image 3 of 3
    • Insert a small screwdriver into the holes the screws were removed from in the previous step to unclip the keyboard.

  3. Keyboard, Disconnect the Cables: step 3, image 1 of 3 Keyboard, Disconnect the Cables: step 3, image 2 of 3 Keyboard, Disconnect the Cables: step 3, image 3 of 3
    • Using a plastic spudger, flip up the retaining latch on the ZIF connector securing the blue ribbon cable, then slide the cable straight out from the connector.

    • To release the orange flex cable, use the tip of a spudger to slide the latches on either side in the direction indicated by the arrows, then pull the cable straight out from the connector.

Conclusion

To reassemble your device, follow these instructions in reverse order.

One other person completed this guide.

Special thanks to these translators:

fr en

77%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/13

30,731 Reputation

261 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 4

Past 30 Days: 12

All Time: 395