Introduction

If your Keurig K70 does not close properly you may need to replace the handle. This guide will walk you through the necessary steps to do so. It is an easy fix but requires an uncommon tool.

Parts

No parts required.

Locate the handle on top of the unit Locate the two Torx head screws on the underside of the handle. Remove them with a T15  screwdriver
  • Locate the handle on top of the unit

  • Locate the two Torx head screws on the underside of the handle. Remove them with a T15 screwdriver

Add Comment

Deck the Halls
With tools and Fix Kits
Bend the handle outward to remove Bend the handle outward to remove Bend the handle outward to remove
  • Bend the handle outward to remove

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Westin McHaney

Member since: 10/06/2016

122 Reputation

1 Guide authored

Team

Cal Poly, Team 20-4, Livingston Fall 2016 Member of Cal Poly, Team 20-4, Livingston Fall 2016

CPSU-LIVINGSTON-F16S20G4

4 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 32

All Time: 241