Introduction

This replacement involves removal of the bottom panel. Certain tools are required.

Ensure Keurig is powered off and unplugged. Turn the Keurig over, and unscrew five 25.5 mm Phillip #1 screws, and remove bottom panel.
  • Ensure Keurig is powered off and unplugged.

  • Turn the Keurig over, and unscrew five 25.5 mm Phillip #1 screws, and remove bottom panel.

Add Comment

Deck the Halls
With tools and Fix Kits
Unwind the Power Cord from the wire channel Unwind the Power Cord from the wire channel Unwind the Power Cord from the wire channel
  • Unwind the Power Cord from the wire channel

Add Comment

Make three cuts along the wires shown Solder the Power Cord Replacement to the same wire attachments Solder the Power Cord Replacement to the same wire attachments
  • Make three cuts along the wires shown

  • Solder the Power Cord Replacement to the same wire attachments

Add Comment

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jake Wynn

Member since: 04/11/2016

606 Reputation

5 Guides authored

Team

Cal Poly, Team 1-7, Maness Spring 2016 Member of Cal Poly, Team 1-7, Maness Spring 2016

CPSU-MANESS-S16S1G7

5 Members

5 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 17

Past 30 Days: 66

All Time: 805