Introduction

The speaker cable on the Kensington Hi-Fi Headphones 33137 connect the headphones to an audio device. This guide shows how to remove this component.

Parts

No parts required.

Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover. Do not pull out the speaker clamp with too much force, or it may break. After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.
  • Starting with the left speaker first, pull out one side of the speaker clamp where the clamp enters the hole on the speaker cover.

  • Do not pull out the speaker clamp with too much force, or it may break.

  • After one side of the speaker clamp is removed from the speaker cover, pull the other side of the speaker clamp out.

Add Comment

Repeat the process in Step 1 to remove the right speaker clamp. Repeat the process in Step 1 to remove the right speaker clamp. Repeat the process in Step 1 to remove the right speaker clamp.
  • Repeat the process in Step 1 to remove the right speaker clamp.

Add Comment

Black Friday
Broken doesn't stand a chance.
Hold the speaker cover in one hand and the speaker ear-padding in the other. Turn the speaker cover counter-clockwise until it stops turning. Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.
  • Hold the speaker cover in one hand and the speaker ear-padding in the other.

  • Turn the speaker cover counter-clockwise until it stops turning.

  • Pull the speaker cover and the speaker ear padding apart to expose the inner components of the speaker.

  • Make sure to pull the speakers apart gently to avoid disconnecting the speaker cable wires from the speaker.

  • If the speaker cover and ear-padding don't easily come apart, then make sure the speaker cover is fully turned.

  • Repeat this process for both speakers.

Add Comment

With the internal speaker component exposed, the wires connecting the speakers to the speaker cable can be cut. Reassembly after cutting the speaker cable wires will require soldering. Proceed with caution. See Kensington Hi-Fi Headphones 33137 Speaker Cable Replacement. Cut each of the wires connecting the speaker to the speaker cable.
  • With the internal speaker component exposed, the wires connecting the speakers to the speaker cable can be cut.

  • Reassembly after cutting the speaker cable wires will require soldering. Proceed with caution. See Kensington Hi-Fi Headphones 33137 Speaker Cable Replacement.

  • Cut each of the wires connecting the speaker to the speaker cable.

  • Repeat this process for each speaker.

Add Comment

After cutting the wires, untie the knot that is in the speaker cable. Repeat this process for each side of the speaker cable. Repeat this process for each side of the speaker cable.
  • After cutting the wires, untie the knot that is in the speaker cable.

  • Repeat this process for each side of the speaker cable.

Add Comment

Pull the speaker cable through the hole in the speaker cover. Repeat this process for each side of the speaker cable to completely  remove the speaker cable from all headphone components. Repeat this process for each side of the speaker cable to completely  remove the speaker cable from all headphone components.
  • Pull the speaker cable through the hole in the speaker cover.

  • Repeat this process for each side of the speaker cable to completely remove the speaker cable from all headphone components.

Add Comment

Conclusion

To reassemble your device, follow the instructions in the Kensington Hi-Fi Headphones 33137 Speaker Cable Replacement.

William Sanders

Member since: 03/26/2014

549 Reputation

5 Guides authored

Team

Clemson, Team 1-3, Benson Spring 2014 Member of Clemson, Team 1-3, Benson Spring 2014

CLEM-BENSON-S14S1G3

3 Members

9 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 5

All Time: 230